ANON Gyratory Screener
ANON gyratory screener is a device that uses the flat rotary motion of the screen body to achieve material screening and grading. Unlike vibrating cleaning screens, its motion trajectory is smoother and suitable for long-term continuous operation
1. Good cleaning effect, can efficiently remove large and small impurities, dust, and improve cleanliness.
2. Compact structure, small footprint, suitable for various front-end cleaning stages of production lines.
3. The screen mesh is easy to replace, and different aperture screens can be changed according to different materials.
4. Smooth vibration, low energy consumption, optimized design, low operating noise, and low energy consumption.
5. It has a wide range of adaptability and can be used for initial cleaning of various grains and seeds such as wheat, corn, soybeans, rice, sesame, etc.
Efficient screening and precise grading
The ANON gyratory screener generates centrifugal or inertial force through the rotation of the screen frame during operation, causing the material to roll on the screen surface, which can significantly improve screening efficiency. It is equipped with different aperture screens, allowing smaller particles to pass through the screen while larger particles are blocked, achieving precise classification. Supporting multiple layers of screens, it can simultaneously separate impurities of various sizes (such as large impurities, small impurities, and clean grains), with a processing capacity of 10-15 tons/hour per single device. Each layer of the screen is equipped with anti blocking devices such as bouncing balls or brushes, effectively preventing wet or fine powder materials from blocking the screen holes and reducing the frequency of manual cleaning.
Wide adaptability
ANON gyratory screener is widely used for initial cleaning and selection of rice, wheat, corn, etc. in grain processing plants, seed grading and impurity removal in seed processing centers, raw material cleaning and pellet feed grading in feed mills, as well as pre-cleaning operations before storage in grain depots and collection points. With it, you can greatly improve the purity of materials and the quality of subsequent processing.
Related Products
FAQ
Abnormal vibration of the screen body during the operation of the gyratory screener may be caused by improper installation of the eccentric weight block, bending of the main shaft, or damage to the bearing. It can be adjusted by adjusting the installation position of the eccentric weight block, replacing or straightening the main shaft, or replacing the bearing.
You can try replacing the screen or patching the holes, tighten the screen frame push rods, inspect the sealing felt belts, and fill the holes; clean or replace the screen, adjust the feed rate, ensure that the material moisture is appropriate, tighten the screen frame push rods and inspect the sealing felt belts, etc.
You can try to reduce the moisture content of the material, replace the screen, check the pulley, adjust the belt tension, increase the feed amount, replace the elastic ball, etc.