The ANON 1LF325 hydraulic flip plow is a modern heavy plowing share plow that realizes 180° up-and-down flipping and reversing through hydraulic system control of the plow body. It can achieve deep plowing in both directions, and there is no need to turn around when tilling, which can eliminate the problems of furrows and ridges of traditional one-way plows. Farmers frequently deploy this moldboard plow in large-scale agricultural operations to achieve precise tillage. Its design actively flips and crushes soil, while simultaneously preparing seedbeds and incorporating crop residues post-harvest. The implement also levels fields efficiently, ensuring optimal soil conditions for subsequent planting.
FEATURES ABOUT 1LF-325
Durability and stability
The 1LF-325 series hydraulic flip plow has a strong frame construction that adapts to various farming conditions and can handle the farming process efficiently. Manufacturers construct the plow body and key components from high-strength alloy steel, and heat treatment achieves a hardness exceeding 50HRC. This process makes the material 2-3 times more wear-resistant than traditional steel. The hydraulic system can automatically reduce pressure and protect the machine in places such as large stones and roots, effectively avoiding friction damage. If you choose such a high-quality hydraulic flip plow, then your farming will be better.
High work efficiency
The ANON 1LF-325 series hydraulic flip plow has a high working width and working depth, which can cover a large area of the required work area. While traditional plows need to manually turn around at the end of the tillage to perform a second flipping, this plow can automatically turnover in 3-5 seconds through a hydraulic system. It always turns the soil in the same direction, leaving no furrows in the field. The 1LF-325 can greatly reduce the time you need to plow, allowing you to spend less effort to get more results.
Low maintenance cost
Unlike the disc plow’s gearbox system, the hydraulic flip plow uses hydraulic cylinders to execute flips, eliminating complex mechanical transmissions. This design significantly reduces failure points and enhances durability. Additionally, its modular wearing parts feature standardized quick-release structures, allowing operators to replace a share manually within just 10–15 minutes.
Specification
FAQ
1. How to deal with the phenomenon of inflexible and stuck hydraulic turnover?
You can check whether the hydraulic oil is pure first. Then look at the shaft of the plow frame to see if there is dirt and weeds tangled, if there is to clean up. The third step is to test the cylinder pressure, which is normally 18-25Mpa. If there is any abnormality, it needs professional maintenance.
2. How to determine if the share needs to be replaced?
If your cutting-edge thickness has worn to a certain extent, or when the ability to break the soil during farming is weakened, the resistance is increased, and your share needs to be replaced.
3. How to adjust the tillage depth?
You can check that the three-point hitch is horizontal and then adjust the support wheel height.
