Looking for a professional grain drying machine in China? ANON is your first choice! With more than 20 years of experience in agricultural machinery, we provide you with one-stop agricultural machinery services.
Product Descriptions
This mobile grain drying machine mainly consists of a drying section, a conditioning section, and a cooling section. It adopts mixed flow drying technology. The raw grain materials fall through the channels between the triangular boxes under the action of gravity. After the hot air passes through the triangular boxes, it enters the discharge box of the drying section and is discharged through the discharge port.
Parameter
Features
1. The mobile grain dryer has its own moving wheels and trailed devices. So it can be towed by a tractor.
2. The grain is pollution-free, and fresh air is input to ensure that the grain is clean and pollution-free.
3. Automatic temperature and humidity control system.
4. Display on time.
5. The mobile grain drying machine can be installed separately for easy transportation.
6. The drying speed is faster and more efficient, and a large amount of materials can be dried in a short time.
FAQ
1. What are the outstanding features of this grain drying machine?
This dryer focuses on flexible mobility, smart operation, and environmental friendliness. It uses indirect heating technology, which can effectively prevent harmful gases produced by combustion from directly contacting the grains. This can better maintain the quality of the grains, making it particularly suitable for drying high-quality seeds. In addition, the equipment has an automatic control system, making operation relatively simple.
2. What to do if the raw materials are not fully dried in one batch?
If the moisture content of the dried grains is uneven or too high, possible reasons could be that the dryer capacity is too small, the air flow of the hot air machine is insufficient, or the feeding speed is too fast, leading to increased load. You can check and adjust the feeding amount accordingly to ensure that the motor does not overload.
3. What causes the equipment to make noise?
Typically, this situation may be caused by uneven placement of the workpiece, lack of lubrication, bearing damage, or loose fasteners. At this point, you should stop the machine and conduct an inspection, evenly place the workpiece, apply lubricant to the bearings or replace the bearings, and tighten all bolts.