As a part of the agricultural machinery connected with the tractor, the disc plow plays a very important role in the ploughing operation of the farmland. It acts on the soil where there are weeds, gravel, garbage, etc. to plow, so that the lower soil and the upper soil are fully mixed together, providing favorable conditions for subsequent farming. The ANON Platform 1LYQ Series disc plow is equipped with a gearbox, through which you can freely adjust the working speed of the plow according to the soil hardness, humidity and other conditions. It adapts to all kinds of complex terrain and conquers all harsh conditions. Whether it is a family farm or a large agricultural manufacturing plant, it can be your best partner.
Technology
The bearing is the core component of a disc plow. It supports the rotation or linear movement of the shaft and keeps the position of the process accurate. Each disc is supported on the bearing individually, and the soil is turned by the rotation of the disc. The bearing of ANON 1LYQ series disc plow is made of 45# cast steel.Through the process of tempering, the bearing will reach a hardness of 38-42HRC, making it more wear-resistant and non-damaging. At the same time, the plow sheet is also the most important accessory when the disc plow is working in the soil. The ANON platform selects 65 manganese spring steel for it, which can reach 44-52HRC hardness after heat treatment. And the surface is treated with steel sand shot blasting, making it wear-resistant, ductile and long service life.
Features
The ANON platform disc plow is connected to the tractor by three point suspension. An upper suspension point is used to adjust the tilt Angle of the agricultural machinery and two lower suspension points support and stabilize the agricultural machinery to form a stable triangular structure, which effectively reduces the sway of the disc plough during movement and improves the stability of the whole machinery.
The 1LYQ series disc plow is driven by a four-wheel tractor. The engine of the tractor transmits power to the gear box on the side of the disc plow through the PTO device, and the gear box sends power to the shaft to drive the disc work. The horsepower of this series can greatly improve your farming efficiency.
This series of disc plows is equipped with a power drive shaft, so the disc can be turned up and down for easier adjustment and higher quality.
This series of disk plowing resistance is small, you work more effortless, its work efficiency is high, low cost, is a cost-effective choice.
Specification
FAQ
- What is the most appropriate tilling Angle?
The ploughing Angle refers to the Angle between the shaft and the direction of travel of the disk plow and determines the cutting width of a disk plow. Generally speaking, the Angle adjustment is between 35 and 60 degrees, and the most common on the market is 40 to 45 degrees.
- What factors determine the depth of plowing?
There may be a number of factors related to how much traction a tractor provides, whether the disc plow has a hydraulic system, soil conditions and the size of the disc.
- How to maintain a discplow to make it last longer?
Remember to clean the machine regularly during the use of the disc plow. Then check the wear situation, replace the damaged parts, and regularly rub the moving parts of the disc plow to ensure that it runs smoothly enough. Avoid prolonged overload with disk plows. Finally place the disc plow in a dry and ventilated environment when it is not in use.
- Service
ANON platform agricultural expert team 24 hours online to answer your questions, if you have a need can immediately click consult.